The hoop bending machine is a processing tool for steel bar work. It is an extension of the bending machine. It can be better processed into specified angles and models.

The machine should be placed on a flat place. Before starting it, first check whether all parts of the equipment are intact. Lubricate important parts in time, check whether the bolts are loose, clean up the garbage around the machine in time, keep it clean, and cut off the power supply in time when not in use.

1.Advantage:

It has the characteristics of low equipment failure rate, fast bending speed of steel bars, low energy consumption without damaging the ribs, low noise and light vibration; it is efficient, applicable and reliable in operation. Two-person operation, light and flexible, 3-5 times faster than manual bending.

2.How to maintain the steel hoop bending machine?

(1). Cleaning: After daily use, the machine surface and working area should be cleaned in time to prevent steel chips and dust from entering the inside of the machine.

(2). Lubrication: Each component of the steel hoop bending machine needs regular lubrication to ensure its normal operation and reduce wear. Lubricating oil should be selected according to the machine manufacturer's requirements, and component surfaces should be cleaned before lubrication.

(3). Adjustment: Each component of the steel hoop bending machine needs to be inspected and adjusted regularly to ensure its accuracy and stability. Bending molds, in particular, should be inspected and replaced regularly to avoid bending inaccuracies or damage.

The maintenance of the steel hoop bending machine can not only ensure its normal operation and extend its service life, but also improve work efficiency and safety.

3.Body structure:

(1). Bending forming mechanism

Mainly responsible for the forming of stirrups. Bend the delivered steel bars into the shape we set.

(2).Quick shearing mechanism

Mainly responsible for the shearing action after the steel bars are formed. It is composed of motor and pneumatic brake clutch. The cutting action is completed instantly after receiving the cutting signal. The action is convenient and quick.

(3). Vertical straightening mechanism

The main purpose is to adjust the vertical straightness of the steel bars. The roller straightening method is used. Just adjust the depth of each set of rollers to easily straighten the vertical direction of the steel bars.

(4). Automatic feeding mechanism

Mainly responsible for the wire feeding action of steel bars during the bending process. The servo motor drives two sets of rollers to complete the wire feeding action. The movements are accurate and quick.

(5). Horizontal straightening mechanism

The main purpose is to adjust the horizontal straightness of the steel bars. This mechanism is equipped with an automatic feeding device. The cylinder presses the roller forward and backward. The active roller is driven by a motor, and the action of the motor drives the steel bar to be fed.